Drydene AllTec™ Euro 5W-40 Synthetic Motor Oil
DRYDENE ALLTEC™ EURO 5W-40 is a synthetic ‘full SAPS’ formula engine oil is designed to meet and perform at the highest standards required in European gasoline and diesel-powered engines both naturally aspirated and turbo-charged.
Volumes16 Gal Keg, 5 Gal Pail, 55 Gal Drum, Bulk
DRYDENE ALLTEC™ EURO 5W-40 is intended for use on modern gasoline and diesel passenger car engines including direct injection, multi-valve and turbo-compressed models where a ‘full SAPS’ formulation is recommended.
- API SN
- ACEA A3/B4-12
- BMW LL-01
- MB 229.3, 229.5, 226.5
- Porsche A40
- Renault RN 0700/0710
- VW 502.00/505.00
* – Other applicable uses may exist. Please contact Drydene Performance Products, Inc. for more information.
Features & Benefits
DRYDENE ALLTEC™ EURO 5W-40 provides superior performance and protection against wear and the formation of harmful deposits and varnish in today’s high-performance European engines. It is formulated using premium synthetic base oils and chemically advanced additives to help reduce oil consumption, resist thermal degradation and inhibit sludge formation that can reduce engine power and increase oil consumption.
ALLTEC EURO 5W-40 is also designed to ensure smooth and consistent start up and oil flow in low temperature conditions as well as protection against low-speed pre-ignition (LSPI) which can occur in modern GDI and TGDI engines.
|PROPERTY||TEST METHOD||SAE 5W-40|
|Viscosity @ 40°C, cSt||ASTM D445||83.4|
|Viscosity @ 100°C, cSt||ASTM D445||13.1|
|Viscosity Index||ASTM D2270||171|
|NOACK, Wt %||ASTM D6375||10.0|
|Pumping Viscosity @ -35°C||ASTM D4684||24,100|
|Cold Cranking Simulator @ -30°C, cP||ASTM D5293||5,850|
|Pour Point °C||ASTM D97||-45|
|Phosphorous, Wt %||ASTM D5185||0.094|